31
8027872/1JTM/0-8/2023-05| SICK O P E R A T I N G I N S T R U C TI O N S | FLOWSIC550
Subject to change without notice
COMMISSIONING 8
8 Commissioning
8.1 Important information
All activities described in “Mounting” and “Electrical installation” must be completed before
commissioning.
8.2 Commissioning with the FLOWgate
TM
operating software
8.2.1 Auxiliary means and accessories required
8.3 Connecting to the device
1 Install the FLOWgate
TM
operating software.
2 Connect the service adapter to the service interface (M12 plug) and to the USB interface
of your computer.
Fig. 7: Service interface
FLOWgate
TM
is delivered with your measuring
device or available on the SICK website.
The current FLOWgate
TM
version is available
via the following link:
https://www.sick.com/de/de/p/p484048
Service adapter (M12/USB) Included in scope of delivery
To Next Page
Loading...
Need help?
General
