SICK RFU63 Series - Product features and functions (overview)

No. of
units
Component Notes
1 Printed Technical Information
RFU63x Regulatory Compliance
Information, multilingual
The document includes information on:
•
Regions for which the device is approved in a
country or group of countries
•
Conformities fulfilled
•
If applicable, country-specific operating condi‐
tions to be upheld when operating the device
NOTE
The RFU630-041xx does not have an integrated antennae and requires at least one
external antenna for operation. External antennas are not included with delivery.
The following associated configuration and information components are not included in
the delivery. The components are available online via the product page of the device or
the configuration software.
Table 4: RFU630: other associated components
Component Notes
SOPAS ET configuration software and
device description file (*.sdd-file) for the
RFU63x
Available online at:
•
www.sick.com/SOPAS_ET
RFU63x operating instructions as PDF in
English, French and German. Other lan‐
guages may be available.
Available on the product page of the device
RFU parameter description as PDF in Eng‐
lish and German.
Accessories
The following accessories for constructing a complete RFID read/write station are not
included in the scope of delivery of the device. If required, order accessories separately.
•
Connecting cables
•
External antenna(s) with suitable brackets and connecting cables
•
Read cycle trigger sensor, e.g. photoelectric retro-reflective sensor for object-spe‐
cific triggering
•
CDB650-204, CDM420-0006 connection module or CDF600 fieldbus module
•
UHF transponder
•
Mounting accessories
The actual scope of delivery may differ for special designs, additional orders or due to
the latest technical changes.
3.2.4 Product features and functions (overview)
NOTE
In addition to the existing operating instructions, the use of the RFU parameter
description is recommended:
•
This parameter description explains the UHF-RFID-specific parameters of all
device variants of the RFU6xx product family up to and including the “Service”
user level.
•
The parameter description assists with setting up applications using the SOPAS ET
configuration software.
The RFU parameter description is available in English (part no. 8023085) and German
(part no. 8023084) as well as in other languages, if required.
PRODUCT DESCRIPTION 3
8027750//2022-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU63x
21
Subject to change without notice