12.6.6 Troubleshooting
12.6.6.1 No data appears
If no data appears it might be that the string you are sending are too long. If it is more
than 100 characters you need to increase the data array size, see chapter 6.5.
It could also be that you are missing the <STX> and the <ETX> characters at start and
end of string, those are needed for the PLC to retrieve the string.
12.6.6.2 Error codes
If none of the problems above, have a look at the monitored values in FB_Trispec‐
tor_Test_DB, the Errorcode might tell you what the problem is.
12 APPENDIX
100
O P E R A T I N G I N S T R U C T I O N S | TriSpector1000 8021808/12ID/2019-01 | SICK
Subject to change without notice
To Next Page
Loading...
