Region of interest manipulator
Figure 25: Region of interest manipulator.
Click on the arrows in the image area to move, scale or rotate the region of interest,
according to figure 25.
7.6.3 Tool groups
The tools are divided into three groups:
Find tools Locate objects of different shapes, or features such as
edges and planes.
Inspect tools Inspect properties on located objects or fixed regions in
the image.
Measure tools Measure distance and angle between located objects or
features.
Each tool group includes the following tools:
Find tools Shape tool, Blob tool, Edge tool, Plane tool, Fix Plane tool,
Point tool, Peak tool
Inspect tools Area tool
Measure tools Angle tool, Distance tool
7.6.4 Shape tool
Shape The Shape tool locates a 3D shape in the image and reposi‐
tions other tools accordingly. Use the Shape tool when the
position or rotation of the object varies.
NOTE
If the X-resolution and the profile distance of the image differ more than a factor 3, the
Shape tool will not work properly. To adjust the values, see "Setting the field of view",
page 30.
Shape tool settings
Setting Description
Region shape Set the shape of the region of interest to rectangular or elliptical.
Height range Set upper and lower bounds of the region of interest on the Z-axis.
7 OPERATION
34
O P E R A T I N G I N S T R U C T I O N S | TriSpector1000 8021808/12ID/2019-01 | SICK
Subject to change without notice
To Next Page
Loading...
