Alphabetical Reference Description of functions
60
Clear Screenlock Password
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Herewith the user password will be reset.
Æ page 46
Clear User Data
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• With this function you can delete all the entries made by the user in the
optiPoint 410/420.
Æ page 46
Codec
• Here you can select the audio transfer principle that should be used.
•Standard value Æ page 96.
Æ page 49
Codec Independent Threshold Values
• Max jitter threshold (in ms): The jitter will be compared with this thresh-
old. The jitter will be measured between two consecutive RTP packag-
es.
– Valid values: 1 ... 255.
–Standard value Æ page 96.
• Avg round trip delay threshold (in ms): Round Trip Delay is the summary
of the delays in both directions.
– Valid values: 1 ... 65535.
–Standard value Æ page 96.
Æ page 54
Codec Audio Mode Use of
High
quality
preferred
Uncompressed audio
transmission
Uncompressed audio transmis-
sion use (Æ G.711). Suitable for
broadband Internet connec-
tions.
Low
bandwidth
preferred
Use preferred com-
pressed audio transmis-
sion.
Suitable for connections with
different bandwidths.
Low
bandwidth
only
Use compressed audio
transmission exclusively.
Suitable for connections with
low bandwidth.
To Next Page
Loading...
