Alphabetical Reference Description of functions
74
Minimal Session Length
• for QDC (QoS Data Collection)
•Standard value Æ page 96.
Æ page 54
National Dial Prefix
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Canonical format Æ page 83.
Æ page 47
Non-Compressing Codec Threshold Values
•Non-Packed Æ Codec
• Explanation Æ page 61.
Æ page 54
Observation Interval
• For each observation intervall a threshold exceeding will be checked.
•Standard value Æ page 96.
Æ page 54
Packet Size
• The packet size will be expressed in time units. Available are the values
Auto, 10 ms und 20 ms.
•Standard value Æ page 96.
Æ page 49
Phone Identity
• Displays the Phone Identity of the optiPoint 410/420.
Æ page 45
PING Test
• Conduct a Æ PING test to check whether a server or another terminal
device (e.g., the optiPoint 410/420) can be reached in the network.
Available Addresses:
– User specified IP
– Gateway address
–Default route
– Route 1 Gateway
– Route 2 Gateway
– SNMP address
–DLS address
– QCU address
• For this, enter an Æ IP address as the test target, the connection to
which you wish to test.
Æ page 27 Æ page 49
To Next Page
Loading...
