Description of functions Alphabetical Reference
73
Local Area Code
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Specify the local area code of your company here, e.g., "89" for Munich.
• Canonical format Æ page 83.
•Standard value Æ page 96.
Æ page 47
Local Country Code
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Canonical format Æ page 83.
Æ page 47
Local District Code
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Specify the number of the local district of your company here, (the tele-
phone number without the branch numbers, e.g., "722").
• Canonical format Æ page 83.
•Standard value Æ page 96.
Æ page 47
Location Identifier
• Enter the number of the telephone stored on the server. The number
automatically will be entered into the optiPoint 410/420 and shown in
the Display (also called Local ID). Is no name available the Location
Identifier Number (LIN) will be displayed.
Æ page 55
MAC Address
•Displays the Æ MAC address of a network terminal device (e.g., the
optiPoint 410/420).
Æ page 45
MIB-II Error Count
• Displays the number of error messages according to Æ MIB.
• The used MIB objects are:
Æ page 49
MIB-Objects Explanation
ifInDiscards Discarded ingoing packets
iflnErrors Non-valid ingoing packets
ifOutDiscards Discarded outgoing packets
ifOutErrors Non-valid outgoing packets
To Next Page
Loading...
