Description of functions Alphabetical Reference
77
Service Agent Request
• Enter the Æ Port-Number for transfer of the Service Agent Requests.
Æ page 56
Security Setting
• Select the designated value from the list for the security setting for the
Æ Gateway.
Æ page 55
Silence Suppression
• With this switch you can define whether the suppression of back-
ground noise should be activated during silence (no conversation).
•Standard value Æ page 96.
Æ page 49
SLK Test
• Configurable on optiPoint 420 only.
• Execute this test to check the Æ SLK Display.
Æ page 28
SNMP
• Activate this field to deactivate read access to telephone data (for ex-
ample, the device type can no longer be read via SNMP).
The SNMP traps sent by a telephone are not affected by this.
Æ page 56
SNMP Active
• Activate the checkbox to run the Æ SNMP report.
Æ page 53
SNMP Password
• Specify the password that was defined in the Æ SNMP server as the
password for accessing this server.
• Valid values: Alphanumeric
• Minimum length: 1 (for more information, see Æ Password Functions)
• Maximum length: 24
• Standard value: Public
Æ page 53
To Next Page
Loading...
