03/2013 1 Introduction
1.3 Operating Concept
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
1-13
Fig. 1-3: Login
Overview
The functions of SINUMERIK Integrate are subdivided into five main categories
that can be reached via tabs. The "Machine information" and "Set up functions"
tabs always apply to the selected machine.
Note
The availability of each function to the machine operator in each of the various
roles is described in the Appendix.
Details of the functions can be found in the related chapters.
Fig. 1-4: Basic principle of operation
Tabs Description Type
Machine
information
The "Machine information" tab shows you
important information about a particular
selected machine.
It is divided into the following areas:
• Maintenance
• Fault services
• Remote access
ACTION
Configure
functions
On the “Configure functions” tab you can make
all settings for the selected machine.
It is divided into the following areas:
• Maintenance
• Fault services
• Global settings
• Copying function settings
• Client-server communication
ACTION
Organization tasks The "Organization tasks" tab contains
functions and services that apply to all
ACTION
To Next Page
Loading...
Need help?
General
