4 Organizational tasks 03/2013
4.2 Service cases
© Siemens AG 2006-2013 All Rights Reserved
4-230 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
4.2.3 Requesting fault processing on the control
Function description
Fig. 4-7: Requesting fault processing on the control
Function Description Type
Please write a short fault report
Report fault
Fault report
In the event of a fault, a report can be sent
directly to the control via the operating
software which immediately leads to a fault on
transfer.
Since a name was not given to the fault help
request here, the first 40 characters are used
automatically as the fault name on the internet
PC.
DISPLAY
INPUT
(Max. 2000
characters;
any character
permissible)
Contact data
Requested by Irrespective of the person who is currently
logged on with SINUMERIK Integrate, the
person who made the request can enter
his/her details directly here. These identities
can be different.
DISPLAY
INPUT
Telephone
number
The person who made the request can leave
his/her telephone number for any other
questions that may arise.
DISPLAY
INPUT
(max. 15
digits)
To Next Page
Loading...
Need help?
General
