03/2013 5 Statistics/export
5.1 Multi-machine views
© Siemens AG 2006-2012 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
5-261
5.1.7 Comparing installed components
To compare installed components, a list of machines and the components installed
in them is shown. The components only exist for a machine after the machine has
been connected with an NCU.
Fig. 5-29: Component overview
Function Description Type
Filtering components
Select property The number of machines is limited by the
selection of the components. After filtering,
only machines are displayed that contain at
least one of the selected components.
SELECTION
Exclude property The number of machines is limited by the
selection of individual components. After
filtering, only machines are displayed that do
not contain any of the selected components.
SELECTION
Machines x - y of y
Machine ID Shows the currently selected machine
group. The list is empty and a corresponding
message is issued if a machine group is not
selected or if the currently selected group
does not contain any machine.
SELECTION
Fig. 5-30: Comparing components
To Next Page
Loading...
Need help?
General
