3 Setting up functions 03/2013
3.6 Copy
© Siemens AG 2006-2013 All Rights Reserved
3-194 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description
Back
The process is aborted without copying.
Selection, if only the limit values for the time series
are to be copied. The configurations remain
unchanged, all limit values of the configurations
selected for copying are copied.
Copying limit values can also be used for 1:n copying.
SELECTION
(Toggle)
Result
The copying process is complete when the copy log is displayed.
Fig. 3-78: Copy log
Function Description Type
The log can be printed for documenting the copying
process.
An Image Writer can also be used as printer. This
allows the archiving of the log as file.
SELECT
ICON
Print settings can only be made by means of the
settings for the selected printer.
To Next Page
Loading...
Need help?
General
