03/2013 6 Administration
6.1 Management of the organization
© Siemens AG 2006-2013 All Rights Reserved
SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
6-283
"Settings" tab
Fig. 6-7: Editing the settings of a machine
Function Description Type
Status
Display of the machine's registration status
and the only possibility of removing the
machine registration (Database terminology:
Disconnect).
• Active: As described in the machine
selection menu.
• Connected: Register the machine for using
SINUMERIK Integrate (only possible from
the machine) and disconnect it (requires a
new registration of the machine).
SELECTION
/ DISPLAY
Disconnecting
machine
Although a machine logged on with
SINUMERIK Integrate can remotely be
disconnected, it can only be reconnected
directly on the machine.
The disconnection means that data are no
longer acquired and there is also no
configuration that is synchronized from the
server to the machine.
DISPLAY
ACTION
Operator panel front
Logon always
required
Here you can specify whether a user always
has to log in manually, or whether he/she can
log into the machine automatically in one of the
roles mentioned below (without having to enter
the user name, password, and organization
manually).
DISPLAY
SELECTION
Can be
operated as
Here you can specify the role under which the
user can log in "automatically" (system startup
engineer, service engineer or machine
operator).
DISPLAY
SELECTION
To Next Page
Loading...
Need help?
General
