•
To update (synchronization with the device) click the button Update in the headline of the indication list
(Figure 3-20 a)).
[scmotmlp-160713-01, 1, en_US]
Figure 3-20 Reading the Motor-Starting Log with DIGSI 5
Reading on the Device through the On-Site Operation Panel
•
To reach the motor-starting log from the main menu, use the navigation keys of the on-site operation
panel.
Main Menu → Indications → Motor-starting log
•
You can navigate within the displayed indication list using the navigation keys (up/down) on the on-site
operation panel.
Figure 3-21
Reading the Motor-Starting Log on the On-Site Operation Panel of the
Device
Deletability
The motor-starting log of your SIPROTEC 5 device can be deleted. Read details about this in chapter
3.1.6 Saving and Deleting the Logs.
System Functions
3.1 Indications
SIPROTEC 5, High-Voltage Bay Controller, Manual 67
C53000-G5040-C015-9, Edition 11.2017
To Next Page
Loading...
