ACUSON Freestyle User Manual 4-5
Patient Studies
Patient Soft Keys
Patient Soft Keys
Soft Key Description
SCAN
Returns to the scan screen.
CANCEL
Closes the record without saving unconrmed entries.
CLEAR
Lets you start over by clearing information from all the elds.
WORKLIST
Displayed if Worklist is congured for this system. For more
information see, “Worklist Query” on page 4-6.
Creating New Patient Studies
To enter Patient information:
1. Press the PATIENT Soft Key or select New Patient Study from the SETUP Soft Key menu
to display the New Patient screen.
2. Use the Trackball to place the cursor in each entry eld, then press the left Trackball key
to open the on-screen keyboard. You can also place the cursor over the keyboard symbol
to the right of the entry box and press the left Trackball key to bring up the on-screen
keyboard. You can also use an external USB-compatible keyboard.
3. Save the new patient record, by selecting [OK].
4. To then go directly to the real-time imaging screen select Scan from the SETUP Soft Key
menu.
NOTE: If you start scanning a patient and save images without entering a patient name or ID, the
system will automatically create a Study le for that patient study. The patient name will be listed as
UNKNOWN, a machine-generated ID number will be created, and the date and time of the study will be
recorded. This information will become a part of the image screen saved with the images. During or after
the study, it is possible to modify the patient information that appears in the Patient Study Archive.
NOTE: If a patient already has a study stored in the system, you will still need to enter new patient
information at the time of a new study; the system does not provide patient folders with multiple studies.
NOTE: If the on-screen keyboard does not automatically activate as expected and you have a USB
mouse or a wireless USB mouse connected, disconnect the USB mouse or use the pointer to select the
on-screen typewriter symbol to activate the on-screen keyboard.
To Next Page
Loading...
