Siemens AlgoRex CS1140 - E3 M120 Line Plug-In Module CBA8000;TS9000; E3 M140 FD20 Line Plug-In Module

Line plug-in modules
19
Building Technologies 008726_e_en_--
Fire Safety 06.2017
6.6 E3M120 line plug-in module 'CBA8000/TS9000'
Item Component Preparation Default ex factory
1 'S1' programming switch: I bus ad-
dress
Set in accordance with system documentation Address 0
2 'X1' bridge: Watchdog – attached 'in' -> watchdog active
1
S1
2
X1
6.7 E3M140 'FD20' line plug-in module
Item Component Preparation Default ex factory
1 'I BUS ADR' programming switch:
I bus address
Set in accordance with system documentation Address 0
2 'SYNC-MASTER' programming switch:
Synchronization of alarm devices in
FDnet
if the line plug-in module is the master, set switch 1 to
'ON'
To 'OFF'
3 Serial debug connector
4 Reset button