Siemens AlgoRex CS1140 - 9.3 Gateway limitation (CK)

Operation and floor repeater display
28
Building Technologies 008726_e_en_--
Fire Safety 06.2017
11.4 K3R072 mimic display board
Item Component Preparation Default ex factory
1 Mounting plate Remove, fit according to system documentation, see
also description in document 001260
Fitted
2 'N3' resistor array Remove from all but 1 device, also see description in
document 001260
Equipped
3 'S1' programming switch: Device
address
Set in accordance with system documentation Address 0 (test procedure)
2
S1
3
N3
1
 Then refit board on mounting plate, connect data bus and supply cable as well
as peripherals.
11.5 K3G060 relay board
Item Component Preparation Default ex factory
1 Mounting plate Remove, fit according to system documentation, see
also description in document 001260
Fitted
2 Bridges 'X1'.....'X24': Programming
external potential + or - to relay
contact
Set according to system documentation, see also
description in document 001260
'Open' (relay contact is potential-
free)
1
X1
2
X24
 Then refit board on mounting plate, connect data bus as well as peripherals.