Peripheral devices
26
Building Technologies 008726_e_en_--
Fire Safety 06.2017
10 Peripheral devices
10.1 E3G091 remote transmission interface
Item Component Preparation Default ex factory
1
0 ς resistors 'X1-6', 'Y1-6': Define
normally open contact (NO) / normally
closed contact (NC)
Possibly resolder according to system documentation,
see also description in document 001260
'Y1/Y2' alarm/fault as normally
closed contact (NC)
'X3-X6' outputs as normally
open contact (NO)
2 Z1I030 or Z1I050 connection cable Remove ground connection on terminal 11, the
E3G091 does not have to be routed to ground
Used
2
Y1...6
X1...6
1