Siemens AlgoRex CS1140 - B3 Q590;595 Plain Text Operating Terminal

Operation and floor repeater display
31
Building Technologies 008726_e_en_--
Fire Safety 06.2017
11.10 B3Q590/595 plain text operating terminal
Item Component Preparation Default ex factory
1 'S3' programming switch: LON bus
address
Set in accordance with system documentation Address 0
2 'S4-1' programming switch: Buzzer off For 'S4-1' commissioning, set to 'ON' To 'OFF'
3 'R1' resistor: 'LON bus' terminator
resistor
When using stub line: If B3Q5xx is not the last de-
vice, remove resistor 'R1', also see description in
document 001260
100 ς used
4 Designation strips included in kit
Z5B710...750
Slide in Please order separately, or
produce yourself with DOT
Word templates (document
006516)
2
S3
R1
3
4
S4
1
4
 Then connect LON bus and supply cable and if necessary connect LED control,
for installation –> see document 001260.