Siemens AlgoRex CS1140 - 9.1 Main CPU (CI;CC) limitation

Control plug-in modules
23
Building Technologies 008726_e_en_--
Fire Safety 06.2017
8.3 E3G050 'contacts' control plug-in module
Item Component Preparation Default ex factory
1 'S3' programming switch: I bus ad-
dress
Set in accordance with system documentation Address 0
2 'S2' service switch: Activate test LEDs
'H1'....'H8'
Set to 'ON' for commissioning To 'OFF'
1
S3
2
S2
H1
H8
8.4 E3G060 'monitored' control plug-in module
Item Component Preparation Default ex factory
1 'S3' programming switch: I bus ad-
dress
Set in accordance with system documentation Address 0
2 'S2' service switch: Activate test LEDs
'H1'....'H6'
Set to 'ON' for commissioning To 'OFF'
3 'S6' programming switch: 'Emergency
alarm' activation
Set according to system documentation, see also
description in document 001260
To 'OFF' (control lines are
activated during 'Emergency
alarm')
4
0 ς resistor 'X12': Horn outputs supply
Possibly resolder if external horn supply, see also
description in document 001260
To 'X12' used
1
S3
H1
H6
3
S6
S2
X12
2
4