Line plug-in modules
20
Building Technologies 008726_e_en_--
Fire Safety 06.2017
6.8 E3M141 'FD20' line plug-in module
Item Component Preparation Default ex factory
1 'I BUS ADR' programming switch:
I bus address
Set in accordance with system documentation Address 0
2 'SYNC-MASTER' programming switch:
Synchronization of alarm devices in
FDnet
if the line plug-in module is the master, set switch 1 to
'ON'
To 'OFF'
3 Serial debug connector
4 Reset button
To Next Page
Loading...
