Siemens AlgoRex CS1140 - 12 Printer; K3 L080 Printer Control (Included and Fitted in B2 Q191 Protocol Printer); E3 I020 RS232 Slide-In Module

Printer
32
Building Technologies 008726_e_en_--
Fire Safety 06.2017
12 Printer
12.1 K3L080 printer control (included and fitted in B2Q191 protocol
printer)
Item Component Preparation Default ex factory
1 'S1' programming switch: For Baud
rate, set of characters
Set according to description in document 001260,
'Protocol printer B2Q191' chapter
To 'closed'
2 'X11/12' bridges: Define active inter-
faces
All plugged to '2-3'
3 'X13/14' bridges: Define port for 'A3'
connector
S1
1
X11/12
X13/14
2
3
12.2 E3I020 RS232 slide-in module
NOTE
Never plug in or remove flat cable when energized. This may result in a sys-
tem restart.