Siemens Cerberus PRO FC721 - Testing the Installation; Testing Overview

Testing the installation
Testing
12
111 |
118
Building Technologies
A6V10211100_f_en_
--
Fire Safety
2015
-
12
-
15
12 Testing the installation
The fire detection installation can be switched to 'Test' operation mode to check it
is functioning properly.
12.1 Testing
FS720 offers various test functions for efficient testing of devices and logical
functions. Some test methods can be combined, others have to be carried out
individually.
The fire detection installation is in 'Test' operation mode if one of the following test
modes is activated:
● 'Detector test'
● 'Walk test'
● 'Control test'
● 'Installation test'
● Test variants
You will fi
nd more information on testing the system in document
A6V10211076
.
See chapter 'Applicable documents'.