Siemens CLINITEK Status User Manual

9-8
9
Cleaning and Maintenance
Remove the test table from the
analyzer. Next, place the analyzer
on its side and remove the battery
cover by pressing down on the tab
and pulling out. Remove current
batteries. Place 6 new AA-size
batteries into the analyzer. Replace
the battery cover and turn the
instrument back onto its base.
Changing Batteries

Siemens CLINITEK Status Specifications

General

Display	LCD
Sample Type	Urine
Measurement Principle	Reflectance photometry
Type	Urine analyzer
Test Types	Urine test strips
Connectivity	RS232 port
Power Supply	AC adapter
Data Storage	200 patient test results
User Interface	Keypad
Measurement Parameters	Glucose, protein, pH, blood, ketones, bilirubin, urobilinogen, nitrite, leukocytes, specific gravity
Memory	200 results
Operating Conditions	Temperature: 15-30°C, Humidity: 20-80% RH
Measurement Time	Approximately 1 minute