Siemens CLINITEK Status User Manual

5-35
5
Instrument Set Up
Sample Notes
To include Sample Interference
Notes, perform the following steps:
1. At the Select screen, touch
Instrument Set Up.
The Choose Settings screen displays.
2. Use the arrow keys to select
Sample Notes.
3. Touch Select.
The Notes Settings screen displays.
4. To enable Sample Interference
Notes, touch Enabled.
To disable Sample Interference
Notes, touch Disabled.
5. Touch Done twice to return to
the Select screen.
Sample Interference Notes

Siemens CLINITEK Status Specifications

General

Display	LCD
Sample Type	Urine
Measurement Principle	Reflectance photometry
Type	Urine analyzer
Test Types	Urine test strips
Connectivity	RS232 port
Power Supply	AC adapter
Data Storage	200 patient test results
User Interface	Keypad
Measurement Parameters	Glucose, protein, pH, blood, ketones, bilirubin, urobilinogen, nitrite, leukocytes, specific gravity
Memory	200 results
Operating Conditions	Temperature: 15-30°C, Humidity: 20-80% RH
Measurement Time	Approximately 1 minute