Siemens CLINITEK Status User Manual

4
Testing
4-1
Quick Tests
Urinalysis Strip Test
Testing is started from the main
Select screen.
Touch Strip Test to conduct a
urinalysis strip test.
The next screen that appears is
Prepare Test.
Make sure the test table insert has
the reagent strip holder facing
upward.
Also, have the test strip, urine
sample and paper towel ready.
Touch the START button.
If you require more information
regarding use and storage of test
strips, please refer to the strip package
insert.
If you would like the steps for
urinalysis testing to be shown on the
screen then touch Help.
Quick Tests
BIOHAZARD Wear personal protective
equipment. Use universal precautions.
Refer to Appendix H for recommended
precautions when working with
biohazardous materials.

Siemens CLINITEK Status Specifications

General

Display	LCD
Sample Type	Urine
Measurement Principle	Reflectance photometry
Type	Urine analyzer
Test Types	Urine test strips
Connectivity	RS232 port
Power Supply	AC adapter
Data Storage	200 patient test results
User Interface	Keypad
Measurement Parameters	Glucose, protein, pH, blood, ketones, bilirubin, urobilinogen, nitrite, leukocytes, specific gravity
Memory	200 results
Operating Conditions	Temperature: 15-30°C, Humidity: 20-80% RH
Measurement Time	Approximately 1 minute