Siemens CLINITEK Status User Manual

vii
Instrument and Labeling Symbols
This section describes the symbols that appear on the exterior of the
Clinitek Status+ analyzer, the power supply provided with the instrument,
the carton in which the instrument was delivered and the supplies of
reagent strips and cassettes which you will use with the instrument.
Indicates that the input supply is direct current
Identifies that the instrument is type B equipment, which
provides a particular degree of protection against electric shock
Identifies that the instrument is class 111 type equipment,
which is equipment for connection to SELV (Separated Extra
Low Voltage), i.e. a power supply
Double insulated product or transformer may also identify
class 2 equipment (power supply only)
Identifies that the instrument is listed by Underwriters
Laboratories as meeting U.S. and Canadian requirements for
safety
The CE mark identifies that the product complies with the
applicable directives of the European Union
Manufacturer
European authorized representative
Indicates a power on/off button
Caution, consult accompanying documents
In vitro diagnostic medical device
Consult instructions for use
Understanding the Symbols and Display Icons
Class 111

Siemens CLINITEK Status Specifications

General

Display	LCD
Sample Type	Urine
Measurement Principle	Reflectance photometry
Type	Urine analyzer
Test Types	Urine test strips
Connectivity	RS232 port
Power Supply	AC adapter
Data Storage	200 patient test results
User Interface	Keypad
Measurement Parameters	Glucose, protein, pH, blood, ketones, bilirubin, urobilinogen, nitrite, leukocytes, specific gravity
Memory	200 results
Operating Conditions	Temperature: 15-30°C, Humidity: 20-80% RH
Measurement Time	Approximately 1 minute