Siemens CLINITEK Status User Manual

1-6
1
Unpacking & Set Up
Warranty Registration
1. Lift the printer cover on the
instrument and the serial plate with
the instrument’s serial number will
be visible.
2. Write the serial number and
installation date on the Warranty
Registration Card. After the
instrument has been successfully
installed, complete the information
on the Warranty Registration Card
and return the card to your local
Siemens office (for a contact list
see Appendix A, Local Technical
Support Providers and
Distributors).
12
Set Up

Siemens CLINITEK Status Specifications

General

Display	LCD
Sample Type	Urine
Measurement Principle	Reflectance photometry
Type	Urine analyzer
Test Types	Urine test strips
Connectivity	RS232 port
Power Supply	AC adapter
Data Storage	200 patient test results
User Interface	Keypad
Measurement Parameters	Glucose, protein, pH, blood, ketones, bilirubin, urobilinogen, nitrite, leukocytes, specific gravity
Memory	200 results
Operating Conditions	Temperature: 15-30°C, Humidity: 20-80% RH
Measurement Time	Approximately 1 minute