5-7
5
Instrument Set Up
Screen 2 of 5
Patient Name – allows you to
choose whether patient name will
be required for running a test –
Enabled (on) or Disabled (off).
Patient ID – allows you to choose
whether Patient ID will be required
for running a test – Enabled (on) or
Disabled (off).
Screen 3 of 5
Choose which to show in
Results list – allows you to choose
whether Patient Name or Patient
ID will be included in the list of
results.
Last Operator’s Name displayed
– allows you to choose whether a
“Select Last Operator” option is
available to the user when you are
prompted to enter an Operator
Name during Strip or Cassette
Testing – Enabled (on) or
Disabled (off).
Operator and Patient Information
A total of 950 patient records
can be stored in the analyzer. When
the limit of 950 has been reached,
the oldest test will be deleted from
the analyzer. Deleted information
cannot be retrieved from the
analyzer. If Patient’s Name and
Patient ID are both disabled, a
sequential test number will be shown
with the test results.
To Next Page
Loading...
