5-18
5
Instrument Set Up
Plus System – select Enabled
(on) if you wish to have results
shown in the Plus System. You will
also see in Appendix B that results
can be recorded in the Plus System
(which uses “+” symbols) instead
of clinical units such as mg/dL
(mmol/L). In some languages there
is no difference between the normal
system and the Plus System.
Screen 2 of 2
Mark Positive Results – allows
you to choose whether positive
results should be marked with an
asterisk (see Appendix B for results
to be shown as positive).
Touch the round button next to Yes
to mark and record positive results.
These will be marked on the
display, on a printout and when the
data is transferred to a host
computer.
Touch No and positive results will
not be marked.
Touch Done to enter your choice
and return to Instrument Settings.
Instrument Settings
To Next Page
Loading...
