Operating Manual of FC18 Controller
Page: 41/70
23. HOW TO SAVE CONFIGURE
Function: Save changes permanently, otherwise the changes will be lost when
the system is restarted.
Steps:
1. Press “Menu” to browse the main menu (Fig. 22-1).
Main menu displayed.
2. Press “→” to pop out the "Conf" submenu (Fig.22-2). Press "↓" to select
“Save Configure" and press “OK” to display the configuration saving
window (Fig.22-3). Press "OK" to save the changes.
3. It will return to the original interface after the changes are saved.
Fig.22-1
Fig.22-2
Fig.22-3
To Next Page
Loading...
