Operating Manual of FC18 Controller
Page: 51/70
32. HOW TO CHANGE LANGUAGE
Function: The system provides four kinds of language: English, Taiwan, Hong
Kong, Portuguese. One of them can be selected according to needs.
Steps:
1. Press “Menu” to browse the main menu (Fig. 31-1).
Main menu displayed.
2. Press “→” to select “Lang” submenu (Fig. 31-2). Select a language you
need and press “OK”.
3. The system language is changed.
Note:
The saved change takes effect immediately.
This operation can only be applied to host machine.
Fig.31-1
Fig.31-2
To Next Page
Loading...
