About this document
5
Building Technologies 007828_b_en_--
Fire Safety & Security Products 09.2008
1 About this document
Purpose
This document describes the installation and commissioning of the hardware mod-
ules of the control unit FC700A. The consistent adherence to these instructions is a
prerequisite for a safe application.
Target group
This product documentation and the work instructions are aimed at the following
persons, who have a particular function and have the corresponding training and
qualification.
Group of persons Activity Qualification
Installation personnel They install product, device or system compo-
nents and subsequently carry out a general per-
formance check.
Professional training in the field of building auto-
mation or electrical installations.
Commissioning personnel The configuration of the products, devices or
systems for specific customers at the place of
installation.
They check serviceability and officially clear the
product, device or system for use by the operator
/ customer. They are also responsible for trouble-
shooting.
They have had the training appropriate to their
function and to the commissioning of the prod-
ucts, de-vices or systems and have attended the
technical training courses for commissioning
personnel.
Reference documents
Information in Document
000257 Test lamp, Operating instructions
001164 DZ1191, RE6, RE6T, RE10, FDUM29x, Detector exchanger, Detec-
tor tester, Telescope rods
1276 DLO1191 Linear smoke detector, Technical description, Planning,
Installation, Commissioning
1462 DZ1193 Detector exchanger and tester, Operating instructions
1673 DF1191, DF1192, DF1192 (UL/ULC), DF1101-Ex, DF1101-Ex
(UL/ULC), DF1151-Ex, Infrared flame detectors, Technical descrip-
tion, Planning, Installation, Commissioning
007798 NK8000 MP3.20, NK8223 Ethernet Port, NK8222 Ethernet Port for
a single subsystem, NK8225 Ethernet Port with ACnet Gateway,
Installation, Function & Configuration, Commissioning, Safety Regu-
lations
007827 Installation housing H26... /H28...
007831 Hardware description
007833 Maintenance instructions
007835 Operating instructions
007836 Planning
007894 Templates for inscription stripes
007895 Operating platform for Tools
Work and operational safety
Before personnel begin work on the system they must have read and understood the related operating
instructions, in particular chapter 2 ”Safety regulations”.
To Next Page
Loading...
Need help?
General
