Siemens FDCIO223

Structure and function
27
Building Technologies
009122_e1_en_--
Fire Safety
2015-10-06
3.4 Input/output configuration options (secondary side)
Both inputs/outputs can be configured independently of one another. The table
below shows which configurations are possible for input/output 1 and
input/output 2.
Configuration
Input/output 1
Input/output 2
Siemens/Cerberus detector line X X
SynoLINE300 detector line X X
Contact input X X
Control line (monitored/non-monitored) X X
Comment
The device is configured on the control panel with the aid of the configuration tool.
You will find more detailed information in the control panel documentation.