3.4.1 Configuration as a collective detector line (GMT)
3.4.1.1 Detectors which can be connected
Different generations of detector can be connected to the input/output module, e.g.:
Collective detector line configured as Siemens/Cerberus:
‒ MS6; only detectors with LED alarm indicator (not incandescent lamps)
‒ MS7
‒ MS9
‒ SIGMACON (SIGMASYS GMT)
‒ AlgoRex DS110x
Special detectors on the collective detector line, configured as
Siemens/Cerberus:
‒ Flame detector S2406, DF119x, FDF2x19
‒ Linear detector A2400, DLO1191, FDL2x19
‒ Neural fire detector FDOOT2419
‒ Intrinsically safe ex detector DS110x-Ex, DF1101-Ex, F911
‒ Titanus ProSens smoke extraction system (only with new resetting board
type E548/c)
Collective detector line configured as SynoLINE300:
‒ Synova300
‒ Third-party products in accordance with 'Industrial conventional'
(Synova300C)
It is not possible to operate Siemens/Cerberus detectors and SynoLINE300
detectors simultaneously on the same detector line. The compatible detector
types are listed in the 'Collective compatibility' chapter and in the 'List of
compatibility'.
See also
Collective compatibility [ 63]
To Next Page
Loading...
