Siemens FDCIO223

Structure and function
40
Building Technologies
009122_e1_en_--
Fire Safety
2015-10-06
Behavior in the event of an error (control panel-specific)
Error
Configuration option
Failure of 24 V power supply Open (configuration not possible)
Error involving control panel (e.g.,
communication with control panel
interrupted)
 Relay remains unchanged
 Relay deactivated
 Relay activated
 Degraded mode horn function (only
possible with FS20/FS720 control
panels)
Notes
 In the case of the 'Degraded mode horn' function, the input/output module
accepts the 'Sounder ON' command. This function is only supported on
FS20/FS720 control panels.
 The monitoring of monitored control systems will only be resumed 30 seconds
after deactivation.
3.4.3.3 Control with confirmation
Control with confirmation is not supported by the following control panels, i.e., the
confirmation is not configured or processed on the control panel:
 FC20xx
 FC72x
 AlgoRex