104
Individual handset settings
S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_hs.fm / 08.06.2004
Changing the name of the base
The names "Base 1" to "Base 4" are assigned automatically. You can change the name of
your base.
Adjusting the loudspeaker volume
You can adjust the handsfree volume to five levels and the earpiece volume to three
levels – even while an external call is in progress.
Ringer echo
In certain situations, the sound quality could be less than what you are used to. You can
enhance the sound quality of the long ringer melodies (4–10).
i
The name of the base is handset-specific, i.e. the base receives the name
which was assigned by the handset. The same base can have different
name on different handsets.
v
Open the menu.
sì
Select the menu item and confirm.
s Select Base
Select the menu item and confirm.
R[RRRRRRRRRRRRRRRRRRR]
s Edit
Select the base and press the display key.
~ Enter a new name (up to 16-characters)
(for inputting text see page 155).
[ RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Save
Now press the display key to confirm the setting.
OK
OK
v
Open the menu.
sê
Select the menu item and confirm.
Handset Volume
Confirm. You hear the current volume setting for
handsfree talking.
r
Set the volume for handsfree talking (1-5) in the
input field.
sr Scroll one line lower and set the earpiece volume
(1–3).
[ RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Save
Press the display key to save the setting.
a
Long press (back to idle status).
OK
OK
v
Open the menu.
sê
Select the menu item and confirm.
Ringer Echo
Confirm (‰ = activated).
a
Long press (back to idle status).
OK
OK
To Next Page
Loading...
