Siemens Gigaset C1 - Assigning a Phone Number (MSN)

83
System settings
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004
Assigning a phone number (MSN)
You can assign certain individual phone numbers (MSN's) to registered terminals. When
doing this determine
◆ which phone number makes a registered terminal ring (receive MSN)
◆ under which number an internal user dials (send MSN).
Assigning a receive MSN
As supplied, a newly registered handset will ring whenever a phone number you have
set up is dialled.
If you want to assign the handset certain specific receive MSN's:
Assigning a send MSN
When the phone is supplied no send MSN has been entered. The exchange provides the
send MSN.
You can determine a send MSN for each internal user. This MSN is shown to the person
you call and the call is also charged to this MSN.
MENU
Open the menu.
s Base Settings OK
Select the menu item and confirm.
s Settings OK
Select the menu item and confirm.
~ OK
Enter system PIN if required (page 78).
s Setup user OK
Select the menu item and confirm.
s Setup device OK
Select the menu item and confirm.
s Int.11
Select internal number for the handset, e. g. Int.11 .
MENU
Open the submenu.
s Receive MSN OK
Select the menu item and confirm.
s OK
Select MSN and confirm, e. g. MSN1: Anna.
MENU
Open the menu.
s Base Settings OK
Select the menu item and confirm.
s Settings OK
Select the menu item and confirm.
~ OK
Enter system PIN if required (page 78).
s Setup user OK
Select the menu item and confirm.
s Setup device OK
Select the menu item and confirm.
s Int.11
Select internal number, e. g. Int.11 .
MENU
Open the submenu.
s Send MSN OK
Select the menu item and confirm.
s OK
Select MSN and confirm, e. g. MSN1: Anna.