Siemens Gigaset C1 - Defining Authorisation; Emergency Numbers

92
Security settings
S1_SL1 / englisch / A31008-M373-B103-1-7619 / security.fm / 08.06.2004
Defining authorisation
You can set different authorisations for all registered devices:
◆ Unrestricted (set as factory default)
All devices can answer incoming calls and make external/internal outgoing calls.
◆ Incoming only
The devices can only answer incoming calls. External calls cannot be made. Internal
calls can be made. Emergency numbers can be dialled.
◆ Internal only
The devices can only make and answer internal calls. Emergency numbers can be
dialled.
Emergency numbers
By default, the country-specific emergency numbers are entered. These cannot be
edited or deleted. You may enter five emergency numbers of your own choice.
Setting up, editing, reading and deleting personal emergency numbers
v
Open the menu.
sí
Select the menu item and confirm.
s Settings
Select the menu item and confirm.
~
If required, enter the PIN and confirm.
Security
Confirm.
s Authorisation
Select the menu item and confirm.
s Internal 11
Select the internal number, e.g., Internal 11.
Í
Press the display key to open the submenu.
s Internal Only
Select authorisation, e.g., Internal Only, and con-
firm. The set authorisation is marked with a
‰.
a
Long press (back to idle status).
OK
OK
OK
OK
OK
OK
i
The emergency number can also be dialled by a handset with restricted
authorisation (e.g., Internal only).
v
Open the menu.
sí
Select the menu item and confirm.
s Settings
Select the menu item and confirm.
~
If required, enter the PIN and confirm.
Security
Confirm.
s Emergency nos.
Select. The emergency numbers list is opened.
s <no entry>
Select list entry, e.g., <no entry>.
OK
OK
OK
OK