66
Setting the answering machine
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / answeringm_config.fm / 08.06.2004
Locking the answering machine, defining AM PIN
You can protect your answering machine against unauthorised access. To do this, define
an AM PIN (Personal Identification Number) and activate the AM lock. The settings may
then only be changed and the messages played back after the PIN has been entered.
Entering and changing the AM PIN
When supplied, the AM PIN is preconfigured to 0000.
Precondition: You have selected an answering machine (page 53).
If you make an error when keying in the AM PIN you can delete your entry using
the
W key and enter it again.
Activating/deactivating the AM lock
When the phone is supplied the answering machine lock is deactivated.
Precondition: You have selected an answering machine (page 53).
Activating/deactivating automatic listen in on the handset
You can set your answering machine to switch a handset assigned to it automatically to
listen in when a message is recorded.
When supplied, automatic listen in is deactivated.
Assigning a handset
Only one handset may be assigned to an answering machine. You can choose a handset
to which one of the answering machine's receive MSNs is assigned. Only terminals that
support handsfree talking are displayed. Auto answer (page 67) must be activated.
Precondition: You have selected an answering machine (page 53).
i
The answering machine can only be controlled remotely if you have
defined an AM PIN.
s Settings OK
Select the menu item and confirm.
s Change AM-PIN OK
Select the menu item and confirm.
~ OK
Enter new AM PIN (up to 8 digits) and confirm.
~ OK
Repeat the new AM PIN and confirm.
s Settings OK
Select the menu item and confirm.
s AM lock OK
Select the menu item and confirm (‰ = lock set).
s Settings OK
Select the menu item and confirm.
s Aut. listen in OK
Select the menu item and confirm.
To Next Page
Loading...
