45
SMS (text messages)
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / sms.fm / 08.06.2004
Sending a text message to an e-mail address
You can send a text message to an e-mail address. To do this you should write the recip-
ient's e-mail address at the start of the text message and send this text message to the
call number of the e-mail service of your SMS send centre.
Entering the e-mail address at the start of the text message
Enter the recipient's e-mail address at the start of your text message. Use a space to sep-
arate the e-mail address from the message text (e. g. for "Anny Way", Deutsche Tele-
kom) or, if required for other providers, by inserting a colon.
You can save the text temporarily with MENU,
s Save TextOK.
Gigaset C1:
Enter the "@" character using the hash key R (press x 2), the colon using the key Q
(press 8 times), and the space with 1 (press once).
Gigaset C2:
You can do this using the (page 108) predictive text.
If predictive text is on, enter "@" by giving the hash key
R 1 long and 1 short press.
If the predictive text feature is deactivated enter the character "@" using the hash
key R (press 2 times ), the colon using the Q key (press 8 times) and the space
character using the
1 (press once ).
Precondition: You are writing a text message (page 41) and the input field is open.
Entering the text of the message
~
Enter the full e-mail address and end it with a space
or a colon.
~
Enter the text. The text is always displayed on one
line.
MENU
Press display key to open menu.
Send Text OK
Confirm.
1 U
p.mai@ort.de Hello
ÛuvMENU
E-mail address, space,
SMS text (example).
To Next Page
Loading...
