Siemens Gigaset C1 - Date and Time; Setting the Date and the Time; Changing the Time Mode

74
Date and Time
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / time_calendar.fm / 08.06.2004
Date and Time
Setting the date and the time
Correct date and time settings are essential if, for example, you want to know exactly
when calls were received.
The first time you make a call on your phone, the date and time are transmitted by the
exchange. However, you can also set the date and time on the handset.
Changing the time mode
You can choose between the 12 hour and the 24 hour display (factory setting) for the
time (a.m. = 1st half of the day; p.m. = 2nd half of the day).
MENU
Open the menu.
s Calender/Clock OK
Select the menu item and confirm.
s Date/Time OK
Select the menu item and confirm.
... then
Enter the date:
~OK
Enter day/month/year and confirm. Example:
For 20.05.2003, enter
2QQ5QI.
Enter the time:
~OK
Enter hours/minutes and confirm. Example:
For 9.35, enter
QOI5.
Only when the 12-hour display is selected:
sOK
Select a.m. or p.m. and confirm.
a
Long press (back to idle status).
MENU
Open the menu.
s Calender/Clock OK
Select the menu item and confirm.
s Time Mode OK
Select the menu item and confirm.
either ...
s 12 hour OK
Select the menu item and confirm (‰ = On).
or ...
24 hour OK
Confirm (‰ = On).
a
Long press (back to idle status).