Siemens Gigaset C1 - Assigning an MSN a Ringer Melody

84
System settings
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004
Assigning an MSN a ringer melody
Each new receive MSN you set up is automatically given its own ringer melody, which
you can change individually. For a receive MSN you can:
Select one of the available ringer melodies. This means that all handsets will use this
ringer melody to indicate an incoming call to a receive MSN.
i
Instead of ringer melodies 1 – 10 you can also assign the "device ringer
tone" to an MSN. Then those handsets assigned to the receive MSN will
ring with the ringer melody that is set for the handset for external calls
(page 90).
MENU
Open the menu.
s Base Settings OK
Select the menu item and confirm.
s Settings OK
Select the menu item and confirm.
~ OK
Enter system PIN if required (page 78).
s ISDN settings OK
Select the menu item and confirm.
s Set up MSN OK
Select the menu item and confirm.
s
Select MSN, e. g. MSN1: Anna.
MENU
Open the submenu.
s Ringer Melody: 5 OK
Select melody and confirm, e. g. Ringer Melody: 5.