124
System settings
S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004
Activating/deactivating call waiting – CW
This function can be set up separately for each user. When call waiting is activated the
caller will hear the ringing tone if you are already making a call. This call is announced
both acoustically, and visually on your handset screen.
When call waiting is deactivated, the caller will hear the ringing tone if you are already
making a call and other phones are assigned to this MSN.
When call waiting is deactivated, the caller will hear the busy tone if you are already
making a call and yours is the only phone assigned to this MSN.
The function is activated when the phone is supplied. For call waiting with an external
call see page 33.
Setting an external/internal enquiry call
Your ISDN connection offers you 2 simultaneously usable telephone lines (B channels).
You can set up your telephone so that:
◆ when an enquiry call is made during an external call to another external party, the
"hold" is done at the telephone exchange so that your second ISDN line remains free.
◆ when an enquiry call is made during an external call to another external party, the
"hold" is done in your base, and both ISDN lines are used.
By factory default, Ext. enq. call is activated.
v
Open the menu.
sí
Select the menu item and confirm.
s Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 91).
s Setup user
Select the menu item and confirm.
s Setup device
Select the menu item and confirm.
s Int.11
Select internal number, e.g. Int.11 .
v
Open the submenu.
s Call waiting
Select the menu item and confirm (‰ = activated).
OK
OK
OK
OK
OK
OK
i
If Int. enq. call is set and the second B-channel is being used, the "Hold"
takes place automatically in the telephone exchange.
To Next Page
Loading...
