Siemens Gigaset C1 - Selecting Announce Only and am Mode; Recording;Changing Announcements

139
Operating the answering machine directly
S1_SL1 / englisch / A31008-M373-B103-1-7619 / answeringm_use.fm / 08.06.2004
Selecting announce only and AM mode
You can activate Announcement 1 , Announcement 2 or Announcem. only for each
answering machine. As supplied, the three announcements already contain pre-
recorded announcements. You can delete the pre-recorded announcement and record
your own announcement.
When you select an announcement you also determine in which AM mode the answer-
ing machine is to run (page 137).
◆ Announcement 1 , Announcement 2: Recording mode.
◆ Announcem. only: Announce only mode
In answer and record mode a Concl.announcem is given automatically at the end of a
recording providing you have recorded a concluding announcement.
When the phone is supplied Announcement 1 is selected. The Concl.announcem
contains nothing.
Precondition: You have selected an answering machine (page 138).
Recording/changing announcements
You can record the following announcements: Announcement 1 , Announcement 2,
Announcem. only and Concl.announcem.
Precondition: You have selected an answering machine (page 138).
s Announcements
Select the menu item and confirm.
s Announcement 2
Select announcement, e.g. Announcement 2
(
‰ = set).
Í
Press the display key to open the submenu.
Select
Confirm. The announcement set previously is deac-
tivated automatically.
OK
OK
i
The answering machine switches automatically from answer and record
mode to announce only mode when the memory is full. As soon as mem-
ory space is made available (e.g. because you have deleted some mes-
sages) the answering machine automatically switches back to answer
and record mode.
s Announcements
Select the menu item and confirm.
s Announcement 2
Select announcement, e.g. Announcement 2
(
‰ = currently activated).
Í
Press the display key to open the submenu.
s Record
Select the menu item and confirm.
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
START
Press the display key to start recording.
Say the announcement message.
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
STOP
Press the display key to end the recording. The
announcement is repeated for you to check.
OK
OK