64
Setting the answering machine
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / answeringm_config.fm / 08.06.2004
Specifying the number of rings before the answering machine
starts
You can set when you want the answering machine to activate (after how many rings).
The options are: 1 ring tone, 2 ring tone, ..., 9 ring tone. Instead of a set number of
rings, you can also set the charge saving setting Automatic 2/4 (factory default). In this
setting the answering machine activates automatically:
◆ after 2 rings if there are new messages,
◆ after 4 rings if there are no new messages.
Precondition: You have selected an answering machine (page 53).
Activating/deactivating voice announcement of date and time
You can have the recording date and -time (time stamp) announced when each mes-
sage/memo is played back (activated when supplied).
Precondition: You have selected an answering machine (page 53).
Setting the recording time and recording quality
You can set the maximum length of a message and its recording quality. The recording
quality determines the total recording time of your answering machine.
On the High quality setting the total recording time is up to 12 min., on Long record-
ing (standard quality, generally adequate) up to 25 min. When supplied, the recording
quality Long recording and the recording time Maximum are already set.
s Settings OK
Select the menu item and confirm.
s No. of rings OK
Select the menu item and confirm.
s Automatic 2/4 OK
Select and confirm number of rings or
Automatic 2/4 (
‰ = set).
s Settings OK
Select the menu item and confirm.
Message/Memo OK
Confirm.
s Time stamp OK
Select the menu item and confirm (‰ = activated).
i
The recording of a call ends:
◆ after a pause in speaking lasting more than 8 seconds;
◆ at the end of a call; the caller terminates the connection;
◆ after the set maximum recording time has expired, on Maximum
setting, when the memory is full.
To Next Page
Loading...
