Siemens Gigaset C1 - Activating;Deactivating Advisory Tones

92
Individual handset settings
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / settings_hs.fm / 08.06.2004
Activating/deactivating advisory tones
Your handset uses "advisory tones" to tell you about different activities and statuses. The
following advisory tones can be activated and deactivated individually (the default set-
ting is On).
◆ Key click: Every key press is confirmed.
◆ Acknowledge tones:
– Confirmation tone (rising tone sequence): at the end of an input/setting, when
the handset is placed in the base and when a text message or a new entry arrives
in the caller list or answering machine list
– Error tone (a descending tone sequence): with incorrect inputs
– End of menu tone: when scrolling at the end of a menu
◆ Battery tone: The batteries must be charged.
MENU
Press display key to open menu.
s Audio Settings OK
Select the menu item and confirm.
s Advisory Tones OK
Select the menu item and confirm.
either ...
Activate/deactivate Key Tones:
Key Tones OK
Confirm (‰ = activated).
or ...
Activate/deactivate Battery Low:
s Battery Low OK
Select the menu item and confirm.
s On OK
Select and confirm condition (Off, On, During Call),
e. g. On (checked with
‰).
a
Press the "end call" key briefly to return to the previ-
ous menu level.
or ...
Activate/deactivate Confirmation Tone:
s Confirmation Tone OK
Select the menu item and confirm (‰ = activated).
... then
a
Long press (back to idle status).