Siemens Gigaset C1 - Activating;Deactivating Automatic Pause; Setting Recording Quality

65
Setting the answering machine
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / answeringm_config.fm / 08.06.2004
Setting the recording time
You can limit the maximum length of a message to1 minute, 2 minutes or 3 minutes.
If you set
Maximum for the recording time (factory setting) then it is "unlimited" (until
the memory is full).
Precondition: You have selected an answering machine (page 53).
Setting recording quality
Precondition: You have selected an answering machine (page 53).
Activating/deactivating automatic pause
If automatic pause is activated the answering machine switches to pause mode after
playing back a message or memo. The next message will not be played back until you
press the
s display key.
When the phone is supplied, automatic pause is deactivated.
Precondition: You have selected an answering machine (page 53).
s Settings OK
Select the menu item and confirm.
Message/Memo OK
Confirm.
Message length OK
Confirm.
s 3 minutes OK
Select the recording time and confirm,
e.g. 3 minutes (
‰ = activated).
i
Once the recording period has expired, the concluding announcement is
played automatically if stored. Then the connection is closed down.
There is no limit to the duration of memo recordings.
s Settings OK
Select the menu item and confirm.
s AM quality OK
Select the menu item and confirm.
either ...
Set high quality:
High quality OK
Confirm.
or ...
Set long recording:
s Long recording OK
Select the menu item and confirm.
s Settings OK
Select the menu item and confirm.
s Automatic pause OK
Select the menu item and confirm (‰ = activated).