118
System settings
S1_SL1 / englisch / A31008-M373-B103-1-7619 / settings_bs.fm / 14.06.2004
◆ so that the call is forwarded in your base (internal call forwarding); this means both
telephone lines are engaged
.
For each receive MSN you can store a destination number for each of the three following
conditions:
Immediately – On busy – On no reply
Set-up external call forwardings are entered in a list. Active call forwardings are identi-
fied in this list.
When the phone is supplied external call forwarding is not set.
Setting the location for call forwarding
When the phone is supplied Forward. netw. is set.
i
◆ You bear the costs for the call forwarding.
◆ If the call is forwarded in the base station (internal call forwarding),
then the condition "When busy" is not available.
◆ All three conditions can be activated at the same time.
◆ If Night service was set up for an incoming MSN (page 98), external
call forwarding cannot be set up or changed for this incoming MSN.
v
Open the menu.
sí
Select the menu item and confirm.
s Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 91).
s ISDN settings
Select the menu item and confirm.
either ...
s Forward. base
Select the menu item and confirm (‰ = set).
or ...
s Forward. netw.
Select the menu item and confirm (‰ = set).
OK
OK
OK
OK
OK
OK
To Next Page
Loading...
