Siemens Gigaset C1 - Page 250

71
Using several handsets
C1-C2 isdn / englisch / A31008-M373-B103-1-7619 / several_handsets.fm / 08.06.2004
Activating the room monitor function and entering the "call to" number for
the first time
If the room monitor is activated, you go straight to the room monitor setting when you
press the display key
MENU (open menu).
Setting the room monitor's sensitivity
Deactivating the room monitor
The room monitor function must be deactivated on the handset that is in the baby's
room.
MENU
Press display key to open menu.
s Additional Features OK
Select the menu item and confirm.
Room Monitor OK
Confirm.
either ...
Enter an internal number as the "call to" number:
s Call Internal OK
Select the menu item and confirm.
s OK
Select the handset and confirm.
or ...
Enter an external number as the "call to" number:
s Call External OK
Select the menu item and confirm.
~ OK
Enter phone number and confirm.
i
◆ You can pick the external number from the directory. Instead of key-
ing in the number, press the
h key, use s to select an entry and
confirm your choice with
OK.
◆ If you enter an external number as the destination number, only the
last 4 digits will appear in the input field.
MENU
Press display key to open menu.
s Additional Features OK
Select the menu item and confirm.
Room Monitor OK
Confirm.
s Level OK
If necessary, select and confirm.
s OK
Select Low or High and confirm. The selection is
checked
‰.
MENU
Press display key to open menu.
Room Monitor off OK
Confirm.